Volume : VII, Issue : II, February - 2018

SMART HEALTHCARE MONITORING SYSTEM USING RASPBERRY PI

Ashlesha Patil, S R Suralkar

Abstract :

 

project work is based on transmitting the patient�s health monitoring parameters through wireless communication. To access the patient�s medical parameters in local and remote area, healthcare communication using Internet of Things (IoT) method is adapted. In this paper, monitor patient�s heart rate, body temperature, Respiration rate using Raspberry Pi. After connecting Internet to the Raspberry Pi board it act as a server.Then the server is automatically sends data to the web server .Then these parameters are monitor using webpage anywhere in the world using laptops,smart phone etc. For ECG, unlike traditional electrodes, an EPIC sensor is a noncontact electrometer, meaning that there is no direct ohmic path from the outside world to the sensor input.Since the EPIC sensor makes a high impedance contact to the skin, any contact–enhancing substances, such as gel, paste or water, are not needed.

Keywords :

Article: Download PDF   DOI : 10.36106/ijsr  

Cite This Article:

Ashlesha Patil, S R Suralkar, SMART HEALTHCARE MONITORING SYSTEM USING RASPBERRY PI, INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH : Volume-7 | Issue-2 | February-2018

Number of Downloads : 452

References :