Volume : IV, Issue : I, January - 2015
FPGA Based Implementation of 16 bit RISC Microcontroller
Nilam Patel, Prof. J. H. Patil
Abstract :
This project describes the design and implementation of some of the internal hardware components of a microcontroller. The subsystems designed are the fundamental hardware components necessary to create the 16-bit timer’s input capture and output compare modes, the index register, and other systems. The subsystems designed were the clock controller, the 16-bit timer, the register controller, the register, and the comparator. The project engineers implemented their system using Xilinx to test their logic and VLSI to construct the gates. VHDL code was written in order to implement the project onto an FPGA board.
Keywords :
Article:
Download PDF
DOI : 10.36106/ijsr
Cite This Article:
Nilam Patel, Prof. J.H.Patil FPGA Based Implementation of 16 bit RISC
Microcontroller International Journal of Scientific Research, Vol : 4, Issue : 1 January 2015
Number of Downloads : 1372
References :
Nilam Patel, Prof. J.H.Patil FPGA Based Implementation of 16 bit RISC Microcontroller International Journal of Scientific Research, Vol : 4, Issue : 1 January 2015
Our Other Journals...
-
Indian Journal of
Applied Research Visit Website -
PARIPEX Indian Journal
of Research Visit Website -
Global Journal for
Research Analysis Visit Website