Volume : I, Issue : X, July - 2012
Enhancement of Surface Finish and Surface Hardness of Burnishing Process Using Taguchi Method
V. N. Deshmukh, S. S. Kadam
Abstract :
Ball burnishing is a cold working finishing process, wherein highly polished and hard balls are pressed against a metallic surface of a flat or cylindrical component. In ball burnishing, initial asperities are compresses and modified. The deformation caused is a function of load applied. Since all machined surface consists of a series of peaks and valleys of irregular height and spacing, the plastic deformation created by ball burnishing is a displacement of the material in the peaks which cold flows under pressure into the valleys. The surface material is progressively compressed, then plasticized as the resultant stresses reach a steady maximum value and finally wiped to a superfine finish. In this paper the Taguchi method is presented for enhancement of surface finish and surface hardness.
Keywords :
Article:
Download PDF
DOI : 10.36106/ijar
Cite This Article:
V. N. Deshmukh, S. S. Kadam Enhancement of Surface Finish and Surface Hardness of Burnishing Process Using Taguchi Method Indian Journal of Applied Research, Vol.I, Issue.X July 2012
Number of Downloads : 749
V. N. Deshmukh, S. S. Kadam Enhancement of Surface Finish and Surface Hardness of Burnishing Process Using Taguchi Method Indian Journal of Applied Research, Vol.I, Issue.X July 2012
Our Other Journals...
-
International Journal of
Scientific Research Visit Website -
PARIPEX Indian Journal
of Research Visit Website -
Global Journal for
Research Analysis Visit Website