Volume : III, Issue : VIII, August - 2013
Design and Analysis of Glass Fiber Reinforced Polymer Leaf Spring
Devendra. K Damor, K. D Kothari
Abstract :
This project describes design and analysis of composite leaf spring made of Glass fiber reinforced polymer. The main objective is to compare the load carrying capacity, stiffness and weight savings of composite leaf spring with that of steel leaf spring. This work is carried out on a multi leaf flat spring having nine leaves used by a commercial vehicle. The finite element modeling and analysis of a multi leaf spring has been carried out. It includes two full length leaves and seven graduated length leaves. The material for the conventional leaf spring is 65si7 steel. The dimensions of an existing conventional steel leaf spring of a light commercial vehicle are taken. Same dimensions of conventional leaf spring are used to faicate a composite multi leaf spring using Glass fiber reinforced polymer (GFRP or E–Glass/Epoxy) unidirectional laminates. The FE model of the leaf spring has been generated in proe–5.0 and imported in ANSYS–11.The design constraints are stresses and deflections. A comparison of analytical, FE analysis of steel leaf spring and FE analysis of composite leaf spring results have been done to conclude.
Keywords :
Article:
Download PDF
DOI : 10.36106/ijar
Cite This Article:
Devendra. K Damor, K. D Kothari Design and Analysis of Glass Fiber Reinforced Polymer Leaf Spring Indian Journal of Applied Research, Vol.III, Issue.VIII August 2013
Number of Downloads : 928
Devendra. K Damor, K. D Kothari Design and Analysis of Glass Fiber Reinforced Polymer Leaf Spring Indian Journal of Applied Research, Vol.III, Issue.VIII August 2013
Our Other Journals...
-
International Journal of
Scientific Research Visit Website -
PARIPEX Indian Journal
of Research Visit Website -
Global Journal for
Research Analysis Visit Website