Volume : V, Issue : III, March - 2015
Atomic Force Microscopy study for assessing the characteristics of news materials sealants
Catalina Iulia Saveanu, Oana Dragos
Abstract :
The degree of finishing for a surface depends on the structural features of the materials used. We proposed the comparative assessment "in vitro" of the topography and roughness for 4 sealing resin composite materials. The materials used were: Fissurit® FX (VOCO, Germany), DEFENSE CHROMA (ANGELUS®, Brasil), WAVE (SDI, Australia), PermaFlow™ (Ultradent, USA). Topography and roughness were analyzed by Atomic Force Microscopy (Park SYSTEMS XE –100) for a 5μm × 5μm with scan rate of 0.5 Hz and a resolution of 256 × 256 pixels. Tridimensional topographic analysis was performed by analysis software (XEI – Image–Processing and Analysis). Surface roughness was measured for each material in nanometers. There were differences in surface roughness among the sealants but their values were significantly different in favor of PermaFlow™ (Ultradent, USA).
Keywords :
Article:
Download PDF
DOI : 10.36106/ijar
Cite This Article:
Catalina Iulia Saveanu, Oana Dragos Atomic Force Microscopy study for assessing the characteristics of news materials sealants Indian Journal of Applied Research, Vol.5, Issue : 3 March 2015
Number of Downloads : 498
Catalina Iulia Saveanu, Oana Dragos Atomic Force Microscopy study for assessing the characteristics of news materials sealants Indian Journal of Applied Research, Vol.5, Issue : 3 March 2015
Our Other Journals...
-
International Journal of
Scientific Research Visit Website -
PARIPEX Indian Journal
of Research Visit Website -
Global Journal for
Research Analysis Visit Website